3 Important Gas Pipe Fittings Needed for Safety and Compliance

Gas pipe fittings are the most crucial part of any gas installation. They can either make the entire system secure or susceptible to accidents and hazards. For this reason it is important to ensure that the fittings you choose for your appliance are of high quality and used for the right purpose.

Pipes and Hoses

One of the most important fitting is the hose itself. It needs to be long enough to cover the distance from the hose to the appliances. Leakages are caused by either bad connections or poor quality piping. There are different types of pipes that you can choose.

If the pipe is going to be outdoors or exposed to the sun, you need something that is more durable. Some rubber LPG gas fittings and plumbing supplies are susceptible to UV radiation. Rubber may get worn out if it is placed in area with a lot of moisture and may not be suitable for a busy kitchen or for outdoor use.

Joints and Reducers

Joints and reducers are also an important consideration to make for any serious installations. Sometimes it is inevitable that the piping will have to change direction from the supply of the gas to the location of the burners.

Piping and Safety

Regulations dictate that these joints should not be placed near an area where people are sleeping or an accommodation area. They should also be located in a place that is easy to access. These regulations should be observed when buying plumbing supplies, to ensure both compliance and safety.

Reducers and distributors are important for the sake of flexibility. The best practice for installations of these kind dictate that allowances must be made for movements, vibrations and thermal expansions. The right LPG gas fittings will ensure this flexibility, which is in turn is good for safety and compliance with the highest regulatory standards.

Find us on Google+

4 Key Benefits of Gas Garage Heaters over Electrical Ones

There are two main types of gas garage heaters; those that use propane and the other type use natural gas. The propane ones will use a tank that provides the gas needed by the device. Natural gas heaters are fed by a gas line and each of these devices has its advantages, over the electrical heating devices.

Reliable and Inexpensive

One of the advantages of heating with gas is that it is inexpensive and reliable in the event of power outages. During storms when there is a power outage, both the propane and the natural gas fittings will continue to provide heat reliably.

They are both cheap and reliable. As long as the fittings are done correctly, they will provide reliable heating at a fraction of what electric heaters will cost. Natural gas is the most inexpensive compared to both the propane and other types of plaque heaters.

Faster and Efficient

Another advantage of heating with gas is that, the room warms up faster. If your garage is relatively big, gas is likely to be a better source for the heaters. Not only is it faster, it heats up larger spaces better than electrical appliances. Electrical heaters are considered to be more efficient when heating very small rooms and better at zonal heating.

garage heater

Outdoor Heating

If you want an outdoor heater, gas heating is the best option. Electrical heaters will only raise the electricity bills and the heating is not as efficient as when you are using gas. It is suitable for large house hold and the garage.

The garage heater appliances come in a wide range of sizes. This makes it easy to choose the right fixture for your heating needs. The right size of the heater will ensure that energy is sued efficiently and you will therefore make savings as far as heating is concerned.